文字

Ncurses Terminal Screen Control

  • 简介
  • 安装/配置
    • 需求
    • 安装
    • 运行时配置
    • 资源类型
  • 预定义常量
    • Error codes
    • Colors
    • Keys
    • Mouse
  • Ncurses 函数
    • ncurses_addch — Add character at current position and advance cursor
    • ncurses_addchnstr — Add attributed string with specified length at current position
    • ncurses_addchstr — Add attributed string at current position
    • ncurses_addnstr — Add string with specified length at current position
    • ncurses_addstr — Output text at current position
    • ncurses_assume_default_colors — Define default colors for color 0
    • ncurses_attroff — Turn off the given attributes
    • ncurses_attron — Turn on the given attributes
    • ncurses_attrset — Set given attributes
    • ncurses_baudrate — Returns baudrate of terminal
    • ncurses_beep — Let the terminal beep
    • ncurses_bkgd — Set background property for terminal screen
    • ncurses_bkgdset — Control screen background
    • ncurses_border — Draw a border around the screen using attributed characters
    • ncurses_bottom_panel — Moves a visible panel to the bottom of the stack
    • ncurses_can_change_color — Checks if terminal color definitions can be changed
    • ncurses_cbreak — Switch off input buffering
    • ncurses_clear — Clear screen
    • ncurses_clrtobot — Clear screen from current position to bottom
    • ncurses_clrtoeol — Clear screen from current position to end of line
    • ncurses_color_content — Retrieves RGB components of a color
    • ncurses_color_set — Set active foreground and background colors
    • ncurses_curs_set — Set cursor state
    • ncurses_def_prog_mode — Saves terminals (program) mode
    • ncurses_def_shell_mode — Saves terminals (shell) mode
    • ncurses_define_key — Define a keycode
    • ncurses_del_panel — Remove panel from the stack and delete it (but not the associated window)
    • ncurses_delay_output — Delay output on terminal using padding characters
    • ncurses_delch — Delete character at current position, move rest of line left
    • ncurses_deleteln — Delete line at current position, move rest of screen up
    • ncurses_delwin — Delete a ncurses window
    • ncurses_doupdate — Write all prepared refreshes to terminal
    • ncurses_echo — Activate keyboard input echo
    • ncurses_echochar — Single character output including refresh
    • ncurses_end — Stop using ncurses, clean up the screen
    • ncurses_erase — Erase terminal screen
    • ncurses_erasechar — Returns current erase character
    • ncurses_filter — Set LINES for iniscr() and newterm() to 1
    • ncurses_flash — Flash terminal screen (visual bell)
    • ncurses_flushinp — Flush keyboard input buffer
    • ncurses_getch — Read a character from keyboard
    • ncurses_getmaxyx — Returns the size of a window
    • ncurses_getmouse — Reads mouse event
    • ncurses_getyx — Returns the current cursor position for a window
    • ncurses_halfdelay — Put terminal into halfdelay mode
    • ncurses_has_colors — Checks if terminal has color capabilities
    • ncurses_has_ic — Check for insert- and delete-capabilities
    • ncurses_has_il — Check for line insert- and delete-capabilities
    • ncurses_has_key — Check for presence of a function key on terminal keyboard
    • ncurses_hide_panel — Remove panel from the stack, making it invisible
    • ncurses_hline — Draw a horizontal line at current position using an attributed character and max. n characters long
    • ncurses_inch — Get character and attribute at current position
    • ncurses_init_color — Define a terminal color
    • ncurses_init_pair — Define a color pair
    • ncurses_init — Initialize ncurses
    • ncurses_insch — Insert character moving rest of line including character at current position
    • ncurses_insdelln — Insert lines before current line scrolling down (negative numbers delete and scroll up)
    • ncurses_insertln — Insert a line, move rest of screen down
    • ncurses_insstr — Insert string at current position, moving rest of line right
    • ncurses_instr — Reads string from terminal screen
    • ncurses_isendwin — Ncurses is in endwin mode, normal screen output may be performed
    • ncurses_keyok — Enable or disable a keycode
    • ncurses_keypad — Turns keypad on or off
    • ncurses_killchar — Returns current line kill character
    • ncurses_longname — Returns terminals description
    • ncurses_meta — Enables/Disable 8-bit meta key information
    • ncurses_mouse_trafo — Transforms coordinates
    • ncurses_mouseinterval — Set timeout for mouse button clicks
    • ncurses_mousemask — Sets mouse options
    • ncurses_move_panel — Moves a panel so that its upper-left corner is at [startx, starty]
    • ncurses_move — Move output position
    • ncurses_mvaddch — Move current position and add character
    • ncurses_mvaddchnstr — Move position and add attributed string with specified length
    • ncurses_mvaddchstr — Move position and add attributed string
    • ncurses_mvaddnstr — Move position and add string with specified length
    • ncurses_mvaddstr — Move position and add string
    • ncurses_mvcur — Move cursor immediately
    • ncurses_mvdelch — Move position and delete character, shift rest of line left
    • ncurses_mvgetch — Move position and get character at new position
    • ncurses_mvhline — Set new position and draw a horizontal line using an attributed character and max. n characters long
    • ncurses_mvinch — Move position and get attributed character at new position
    • ncurses_mvvline — Set new position and draw a vertical line using an attributed character and max. n characters long
    • ncurses_mvwaddstr — Add string at new position in window
    • ncurses_napms — Sleep
    • ncurses_new_panel — Create a new panel and associate it with window
    • ncurses_newpad — Creates a new pad (window)
    • ncurses_newwin — Create a new window
    • ncurses_nl — Translate newline and carriage return / line feed
    • ncurses_nocbreak — Switch terminal to cooked mode
    • ncurses_noecho — Switch off keyboard input echo
    • ncurses_nonl — Do not translate newline and carriage return / line feed
    • ncurses_noqiflush — Do not flush on signal characters
    • ncurses_noraw — Switch terminal out of raw mode
    • ncurses_pair_content — Retrieves foreground and background colors of a color pair
    • ncurses_panel_above — Returns the panel above panel
    • ncurses_panel_below — Returns the panel below panel
    • ncurses_panel_window — Returns the window associated with panel
    • ncurses_pnoutrefresh — Copies a region from a pad into the virtual screen
    • ncurses_prefresh — Copies a region from a pad into the virtual screen
    • ncurses_putp — Apply padding information to the string and output it
    • ncurses_qiflush — Flush on signal characters
    • ncurses_raw — Switch terminal into raw mode
    • ncurses_refresh — Refresh screen
    • ncurses_replace_panel — Replaces the window associated with panel
    • ncurses_reset_prog_mode — Resets the prog mode saved by def_prog_mode
    • ncurses_reset_shell_mode — Resets the shell mode saved by def_shell_mode
    • ncurses_resetty — Restores saved terminal state
    • ncurses_savetty — Saves terminal state
    • ncurses_scr_dump — Dump screen content to file
    • ncurses_scr_init — Initialize screen from file dump
    • ncurses_scr_restore — Restore screen from file dump
    • ncurses_scr_set — Inherit screen from file dump
    • ncurses_scrl — Scroll window content up or down without changing current position
    • ncurses_show_panel — Places an invisible panel on top of the stack, making it visible
    • ncurses_slk_attr — Returns current soft label key attribute
    • ncurses_slk_attroff — Turn off the given attributes for soft function-key labels
    • ncurses_slk_attron — Turn on the given attributes for soft function-key labels
    • ncurses_slk_attrset — Set given attributes for soft function-key labels
    • ncurses_slk_clear — Clears soft labels from screen
    • ncurses_slk_color — Sets color for soft label keys
    • ncurses_slk_init — Initializes soft label key functions
    • ncurses_slk_noutrefresh — Copies soft label keys to virtual screen
    • ncurses_slk_refresh — Copies soft label keys to screen
    • ncurses_slk_restore — Restores soft label keys
    • ncurses_slk_set — Sets function key labels
    • ncurses_slk_touch — Forces output when ncurses_slk_noutrefresh is performed
    • ncurses_standend — Stop using 'standout' attribute
    • ncurses_standout — Start using 'standout' attribute
    • ncurses_start_color — Initializes color functionality
    • ncurses_termattrs — Returns a logical OR of all attribute flags supported by terminal
    • ncurses_termname — Returns terminals (short)-name
    • ncurses_timeout — Set timeout for special key sequences
    • ncurses_top_panel — Moves a visible panel to the top of the stack
    • ncurses_typeahead — Specify different filedescriptor for typeahead checking
    • ncurses_ungetch — Put a character back into the input stream
    • ncurses_ungetmouse — Pushes mouse event to queue
    • ncurses_update_panels — Refreshes the virtual screen to reflect the relations between panels in the stack
    • ncurses_use_default_colors — Assign terminal default colors to color id -1
    • ncurses_use_env — Control use of environment information about terminal size
    • ncurses_use_extended_names — Control use of extended names in terminfo descriptions
    • ncurses_vidattr — Display the string on the terminal in the video attribute mode
    • ncurses_vline — Draw a vertical line at current position using an attributed character and max. n characters long
    • ncurses_waddch — Adds character at current position in a window and advance cursor
    • ncurses_waddstr — Outputs text at current postion in window
    • ncurses_wattroff — Turns off attributes for a window
    • ncurses_wattron — Turns on attributes for a window
    • ncurses_wattrset — Set the attributes for a window
    • ncurses_wborder — Draws a border around the window using attributed characters
    • ncurses_wclear — Clears window
    • ncurses_wcolor_set — Sets windows color pairings
    • ncurses_werase — Erase window contents
    • ncurses_wgetch — Reads a character from keyboard (window)
    • ncurses_whline — Draws a horizontal line in a window at current position using an attributed character and max. n characters long
    • ncurses_wmouse_trafo — Transforms window/stdscr coordinates
    • ncurses_wmove — Moves windows output position
    • ncurses_wnoutrefresh — Copies window to virtual screen
    • ncurses_wrefresh — Refresh window on terminal screen
    • ncurses_wstandend — End standout mode for a window
    • ncurses_wstandout — Enter standout mode for a window
    • ncurses_wvline — Draws a vertical line in a window at current position using an attributed character and max. n characters long

用户评论:

[#1] tom dot setliff at gmail dot com [2009-09-17 12:36:07]

I am using php 5.2.9 on FC9 and had issues with ncurses_init() not being defined when I ran a simple script after installing with pecl.  Adding
extension ncurses.so
to my php.ini file resolved this issue. Also when installing with pecl I had some issues, they were resolved by using yum to install additional packages:
yum install ncurses-devel php-pear.

上一篇: 下一篇: